Replacing The Feed Roller - Konica Minolta BIZHUB 501 Service Manual

3. PERIODIC CHECK
3.12.3

Replacing the feed roller

A. Periodically replaced part/cycle
• Feed roller : Every 750,000 prints (Actual replacement cycle: Every 300,000 prints) *1
: Every 675,000 prints (Actual replacement cycle: Every 300,000 prints) *2
*1 501/421
*2 361
Note
• When replacing the feed roller, be sure also to replace the separation roller assy at the same time.
B. Procedure
[4]
68
[3] [2]
[1]
50gaf2c010na
Field Service Ver.2.0 Mar. 2009
1. Remove the bypass unit.
(See P.62)
2.
Remove the push-up plate assy.
(See P.65)
3. Press the conveyance guide [1] in the arrow-
marked direction [2] to remove the support axis [3]
from the hole [4], and then remove the convey-
ance guide.