Konica Minolta BIZHUB 501 Service Manual page 569

4. MECHANICAL ADJUSTMENT
[2]
[3]
[1]
20
4. Close the Right Door and set the Tray.
5. Conduct the copy/print operation and
check to see if the mis-centering
between the center [1] of the paper and
the center [2] of the copied image is
within a standard value (± 3 mm or less
[3]).
6. When the value is not within the stan-
dard value, repeat steps 1 to 5 until the
standard value can be obtained.
4061f3c209na
7. Slide out the Tray and tighten the adjust-
ment screw.
Field Service Ver.1.0 May. 2008