Konica Minolta BIZHUB 501 Service Manual page 593

3. OTHERS
[1]
[4]
[2]
18
[2]
[3]
16aaf2c021na
[1]
16aaf2c022na
Field Service Ver.1.0 May. 2008
Note
• When removing the LU drive board unit, the
bearings [1] and [2] may come off and fall. Be
careful that they do not get lost.
• On the inside of the gear [3], the spacer [4] is
provided. Be careful that it does not get lost.
6.
Remove the 3 screws [1] and then remove the
paper lift motor (M151) [2].