Adjustment/Setting; Mechanical Adjustment; Adjusting The Tilt Of The Lift Plate - Konica Minolta BIZHUB 501 Service Manual

Field Service Ver.1.0 May. 2008

ADJUSTMENT/SETTING

4. MECHANICAL ADJUSTMENT

4.1

Adjusting the tilt of the lift plate

When the lift plate is tilted, paper may not be fed correctly. Adjust the lift plate so that it becomes parallel to the
paper feed roller shaft. When replacing the wire, be sure to conduct this adjustment.
A. Procedure
[1]
1. Remove the right cover and the front cover.
(See P.13)
2.
Loosen the screw [1].
16aaf3c001na
4. MECHANICAL ADJUSTMENT
23