3. Service Mode
3.3
Settings in the License management
3.3.1
Activation
Functions
• To activate i-Option functions.
Use
• To activate i-Option functions with CE.
• The functions can be activated by selecting the desired function and enter the appropriate
license code.
• Administrators also can activate i-Option functions through Administrator Settings.
Setting/
See P.8
Procedure
3.3.2
Deactivation
Functions
• To deactivate i-Option functions.
Use
• To deactivate i-Option functions due to registration error, expiration of lease term, change
to other MFP or etc.
• The functions can be deactivated by selecting the desired function and enter the appropri-
ate deactivation code.
Setting/
See P.12
Procedure
3.3.3
Repair
Functions
• To repair license management information.
Use
• To be used when license management information is lost due to replacement of NVRAM
board or CF card or any other trouble.
• License management information can be repaired by acquiring repair code with repair
request code, and entering the repair code.
Setting/
See P.17
Procedure
3.3.4
Initialize
Functions
• To initialize license management information.
Use
• To be used when license management information cannot be repaired.
• License management information should be initialized when the machine fails to generate
request code or repair request code due to any trouble and the information cannot be
repaired.
Setting/
See P.20
Procedure
6
Field Service Ver.1.0 Mar. 2009