Disassembly / Reassembly; Tools Required - Konica Minolta BIZHUB 501 Service Manual

3. DISASSEMBLY / REASSEMBLY

3. DISASSEMBLY / REASSEMBLY
Caution
• Assembly should be made in reverse order of disassembly unless otherwise noted.
Precautions against static electricity.
• Keep the image controller in an antistatic bag while transporting it or storing it.
• When working in places where static electricity tends to accumulate, such as on a carpet, dis-
charge electricity from your body by touching any metallic portion before handling the image con-
troller.
• Do not touch the contacts on the image controller with your hands, as that may result in poor con-
ductivity.
• Do not physically damage the image controller by dropping it, bending it, etc.
3.1

Tools Required

• Standard screwdriver
Caution
• Be sure to unplug the power cable, not only to turn the copier off, before attempting to make ser-
vicing.
Caution
• Before engaging in Disassembly/Reassembly, check to make sure that all the cables are
unplugged from the copier.
• There may be occasions when boards are damaged if no appropriate grounding measures are
taken. Wear a wrist strap or others during servicing.
• Disassembly/Reassembly should be made on cushioning materials.
6
Field Service Ver.2.0 Mar. 2009