Konica Minolta BIZHUB 501 Service Manual page 584

Field Service Ver.1.0 May. 2008
[2]
[1]
16aaf2c009na
[1] [3] [2]
16aaf2c010na
5.
Remove the 2 screws [1] and then remove the left
cover [2].
6.
Remove the screw [1].
Note
• When installing the separation roller assy, be
sure to set the upper section of the claw [2] at
the center of the marking-off [3] of the plate.
In this way, the separation roller assy can be
horizontally positioned.
2. PERIODIC CHECK
9