Lead Edge Erase Adjustment - Konica Minolta BIZHUB 501 Service Manual

10. SERVICE MODE

10.3.10 Lead Edge Erase Adjustment

Adjusts the leading edge erasure amount.
A. Procedure
1. "Service Mode screen"
Press [Machine].
2.
"Machine Adjust screen"
Press [Lead Edge Erase Adjustment].
3.
"Lead Edge Erase Adjustment screen"
Press [Test Copy].
4.
"Test Copy screen"
With A3 (for metric) or 11 x 17 (for inch) paper selected, press the Start key to output the test pattern (No.
16).
5.
Press [OK].
6.
Check the printer leading edge erasure amount.
Standard value [1]: 3.5 mm or less
7.
"Lead Edge Erase Adjustment screen"
Enter a value through the [+]/[–] or numeric keys and press [Setting].
Setting range: – 2.0 (erasure: smaller) to + 2.0 mm (erasure: larger)
1 step = 0.1 mm
Press [Restore] to return to a value before change.
8.
Repeat steps 3 to 7 until it gets within the standard value.
9.
Press [END].
186
Field Service Ver.2.0 Mar. 2009
[1]
50gaf3c005na