Konica Minolta BIZHUB 501 Service Manual page 144

Field Service Ver.2.0 Mar. 2009
Step
10 Press the [Execution Check screen].
11 "Execution Check screen".
Press the [Start].
Note
• Press [OK] to stop the ISW.
Note
• When the message "Writing data. Do not turn off the power source" displayed and
flashing the data lamp (blue) during executing the ISW, never turn OFF the Main power
switch (SW1) and Sub-power switch (SW2). It may damage the firmware in the ROM.
5. FIRMWARE VERSION UP
Operation
107