Remote Call Forwarding Set - Panasonic KX-TVP200 Installation Manual

Remote Call Forwarding Set

(Available with the KX-TD500 only.) A subscriber and the Message Manager can
program her extension from a remote location to forward various types of calls to a
desired extension or an outside telephone. There are 6 forwarding settings
available:
(1) Forward All Calls
(2) Forward Busy Calls
(3) Forward No Answer Calls
(4) Forward Busy or No Answer Calls
(5) Forward to a CO Line
(6) Forward Cancel.
See Remote Call Forward to CO.
Remote Call Forward to CO
(Available with the KX-TD500 only.) Allows the System Administrator to program
Telephone number 1 and Telephone number 2 as the destination to which the
callers are forwarded when the Remote Call Forwarding is set to an outside (CO)
line. This feature must be enabled in the COS (Class of Service) setting to be
utilised. See Remote Call Forwarding Set.
Review
Plays back a message.
Rewind
Replays the previous 4 seconds of a message.
Rotary Telephone
A telephone capable of pulse dial only. Callers using a rotary telephone will be
automatically forwarded to the operator or the General Delivery Mailbox.
SAVE
One of the utility commands that is used to save VPS data to a personal computer.
Scanning Messages
Allows the subscriber to listen to only the first 4 s of each message. Another method
is to press [2] while listening to a message; this instructs the VPS to skip to the next
message.
Service Mode
The System Administrator or the System Manager can change the call handling
method programmed for each Time Group 1-8.
Station Programming
Programming via the proprietary telephone.
Installation Manual 369