Panasonic KX-TVP200 Installation Manual page 77

Table 4-1
Caller Name Announcement
(System/Personal)*
Caller ID Call Routing*
Personal Greeting for Caller ID* Each subscriber can record up to 4 personal greeting
Time Synchronisation
*
Note
Depending on the model and/or the software version of the connected PBX (see 3.1.1
DPT or Inband Signalling?), you may not be able to utilise some of the features listed
above. For more information, consult your dealer.
DPT INTEGRATION FEATURES
Caller ID Note 1: When an incoming outside call reaches the VPS via the
PBX, the VPS will wait about 2 rings before answering the call to receive the
Caller ID information properly from the PBX.
This waiting time can be changed by using the WCID command (see 7.2.20
Wait for Caller ID (WCID) in 7.2 UTILITY COMMANDS).
Caller ID Note 2: In the documentation for the KX-TD816/1232/612 series
PBX, the Caller ID feature is called CLIP (Calling Line Identification
Presentation).
4.1 GUIDELINES FOR DPT INTEGRATION
The VPS announces the prerecorded Caller ID
callers' names when: (1) extension users listen to
messages from assigned numbers left in their
mailboxes, (2) the VPS transfers calls from assigned
numbers to the users, and (3) the VPS pages the
users by intercom.
If the same Caller ID number is programmed for both
system and personal caller name announcements,
the VPS will use the personal caller name.
The VPS automatically sends calls from pre-assigned
Caller ID numbers to the desired extension, mailbox
or Custom Service.
messages for special callers.
Whenever the PBX sets a new date and time or when
DPT Integration is established, the data is
automatically registered in the VPS.
Installation Manual 77