Kx-Td500 Programming For Digital Integration - Panasonic KX-TVP200 Installation Manual

4.2 KX-TD500 PROGRAMMING FOR DIGITAL INTEGRATION

4.2 KX-TD500 PROGRAMMING FOR DIGITAL
INTEGRATION
A maximum of 2 VPS cards for the VPS can be installed at the KX-TD500. Follow the
procedure below to program the VPS card(s) for DPT Integration.
Note
The KX-TD500 is not sold in the United Kingdom. It is only available in some
countries.
1.
Assignment of the VPS card to be connected to the VPS
Note:
If the VPS card to which the VPS will be assigned is already installed in the KX-
TD500, skip the steps a through d. If a new VPS card is installed in the KX-TD500,
follow the steps below.
a)
Go to the "1-1 Slot Assignment" screen.
b)
Assign the slot "Card Type" to be installed to "DLC" or "DHLC" card.
c)
Click "Apply" to save the card type assignment.
d)
Set "Status" to "INS".
e)
Check the information of "Card Properties" and confirm the LPR version of the card.
78 Installation Manual
Screen output:
Note:
The LPR Version must be "2" or higher for the first VPS card (101: DHLC) to
which the control channel will be assigned, or "1" or higher for the second VPS
card (104: DHLC).