Table of Contents
Advertisement
2.1 SAFETY PRECAUTIONS
2.1
SAFETY PRECAUTIONS
Please read the following precautions before installing the VPS.
2.1.1 Installation
The VPS needs to be mounted on a wall. Improper placement of the system may result in
malfunction, noise, or discolouration. Avoid installing the VPS in the following places:
•
in direct sunlight; in hot, cold, or humid places
•
in areas where there are thermal springs, etc. (where sulphuric gas may damage the
equipment or contacts).
•
where shocks or vibrations are frequent or strong.
•
in dusty places or places where water or oil may come in contact with the unit.
•
near high frequency generating devices such as sewing machines, elevators or electric
welders.
•
on or near computers, telexes, or other office equipment; near microwave ovens or air
conditioners. (Ideally, the VPS should not be in the room with these items and should be
at least 1.8 m away from televisions.)
Do not obstruct the areas around the PBX and the VPS. Both require space above for
cooling and space on the sides for maintenance and inspection.
30
Installation Manual
- Quick Links:
- System Administration
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
