B. Programming based on Windows Application
1.
Select File -> New/Open (BATCH Mode) or Connect -> DSHS Connect/Disconnect
(INTERACTIVE Mode).
Note
When you select INTERACTIVE Mode, you must connect the RS232-c cable between your
PC and the TD1232 unit.
2.
Select Extns -> Station Hunting, and change the Hunting type to AA for Automated
Attendant into the "Type" column of group 16.
Set the Voicemail extension No. into each of the "Agent Extension" columns, and press
OK.
3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
Installation Manual
73