Panasonic KX-TVP200 Installation Manual page 311

4.
For the items selected in Step 3, follow these steps:
• For FWD All—Go to Step 5.
• For FWD Busy—Go to Step 5.
• For FWD No Answer—Go to Step 5.
• For FWD Busy or No Answer—Go to Step 5.
• For FWD to CO—Go to Step 7.
• For FWD Cancel—Go to Step 10.
5.
Type the extension number.
6.
Confirm the entry is correct and Press [2] to accept it. Go to Step 11.
Note
Press [1] to change the extension number—Return to Step 5.
7.
Press [1] or [2] to select Telephone number 1 or Telephone number 2 (Go to Step 9), or
Press [3] to select another telephone number.
8.
Type the telephone number using "0-9" and " ".
Notes
• Please make sure you begin the telephone number with a Line Access Code
(to seize an outside [CO] line).
• When connected to the KX-TD500, the maximum number of characters allowed
to be entered is 24; when connected to other types of PBX, 16.
9.
Confirm the entry is correct and Press [2] to accept it. Go to Step 11.
Note
Press [1] to change the telephone number. Return to Step 7.
10.
Call Forwarding is cancelled. Press [2] to accept it.
11.
Call Forwarding setting data is transmitted to the PBX. If the forwarding setting or
cancelling has been completed properly, you will hear: "Call forwarding accepted" or "Call
forwarding is cancelled".
Note
If you hear "Call Forwarding not accepted. Please check the destination number", the
forwarding setting has not been completed properly at the PBX, possibly because a
nonexistent extension number has been entered as the destination. It is also
possible that the model of the connected PBX does not support the Remote Call
Forwarding Set feature, or its software version is lower than required; for more
information, consult your dealer.
D7 REMOTE CALL FORWARDING SET
Installation Manual 311