Utility Commands - Panasonic KX-TVP200 Installation Manual

7.2 UTILITY COMMANDS

7.2 UTILITY COMMANDS
In the Utility Command Mode, the System Administrator can access the functions described
below by entering the appropriate command at the "$" prompt, and Pressing RETURN.
To select the Utility Commands Menu, follow the menu path as shown:
System Administration Top Menu-3
Utility Command (Type 'HELP' for command list.)
$
Table 7-1
OFLN:
ONLN:
PASS:
TIME:
PSET:
ELOG:
SAVE:
LOAD:
GPRN:
VERS:
CREP:
CCLR:
MWL:
MRL:
MPLT:
HELP:
QSET:
LMON:
PUTD:
WCID:
148 Installation Manual
Sets the system to off-line mode
Sets the system to on-line mode
Sets the System Administrator's password
Sets the system clock, date, and time
Specifies the time reports will be printed
Displays device error log
Stores a backup of the programme or data in the hard disk
Restores a backup of the programme or data to the VPS
Displays all of the VPS parameters
Displays the version of the programme
Displays the keypad assignments, message recording status and the
tree-structure of a Custom service
Clears a Custom service menu access count
Specifies the number of times the VPS attempts to turn on the
message waiting lamp on the extensions
Sets the minimum recording length of a message
Displays the user prompt recording status
Displays brief instructions and a list of Utility Commands
Perform a basic setup of your VPS so that you can use it quickly
Line Monitor
Displays Touchtone Information
Wait for Caller ID