Live Call Screening Button Assignment Via Station Programming; Live Call Screening Cancel Button Assignment Via Station Programming - Panasonic KX-TVP200 Installation Manual

4.4.7 Live Call Screening Button Assignment via Station
Programming
For the Live Call Screening feature to work at an extension, the extension must have an LCS
button lit at the time of the message reception. This key must either be a DSS/BLF or CO key
with a lamp. Follow the procedure below to assign an LCS button on an extension. (This is
station level programming and should be done at each individual telephone.)
PC programming is also possible.
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the desired FLEXIBLE (CO or DSS/BLF) button you want to assign as the LCS
button.
3.
Dial [85] or [92].
Screen output: LCS
4.
Press STORE.
5.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
4.4.8 Live Call Screening Cancel Button Assignment via
Station Programming
This button assignment allows you to assign a Flexible (CO, DSS) button as a Live Call
Screening Cancel button.
PC programming is also possible.
1.
Enter PITS Programming:
a. With the phone on-hook, Press the PROGRAM button.
b. Dial [99]. (Display changes to PT-PGM Mode.)
2.
Press the Flexible (CO, DSS) button that you wish to assign as a Live Call Screening
Cancel button.
3.
Dial [86] or [93].
Screen output: LCS Cancel
4.
Press STORE. The STORE indicator light turns on.
The display shows the initial programming mode.
5.
To exit the Station Programming mode, Press the PROGRAM button or lift the handset.
6.
Repeat these steps for each telephone.
The Live Call Screening Cancel Button Assignment is optional; Live Call Screening can also
be cancelled by Pressing the FLASH (RECALL) button.
4.4 COMMON DPT INTEGRATION FEATURES AND SETUP PROCEDURES
Installation Manual 99