Appendix A System Features; A1 System Features - Panasonic KX-TVP200 Installation Manual

A1 SYSTEM FEATURES

A1 SYSTEM FEATURES
The Voice Processing System has many features that are available to the System
Administrator, the System Manager, and/or System Subscribers. The Table A-1 lists and
briefly describes each key VPS system feature. In addition, references to specific sections of
this manual and the Subscriber's Guide are provided in the references column that pertains to
each feature listed. The specific procedure steps required to initiate, access, or utilise each
feature are detailed in these references.
Note
Depending on the model and/or the software version of the connected PBX, you may
not be able to utilise some of the features available only with DPT Integration. For
more information, consult your dealer.
Table A-1
FEATURE
Alternate Extension
Group
Auto Configuration
(DPT Integration
Only)
Auto Forwarding
178 Installation Manual
DESCRIPTION
A group of extensions, which require a
different call transfer sequence than normal,
placed into a separate group.
Creates mailboxes by obtaining extension
numbers from the Panasonic KX-TD series
telephone system.
Also sets the time and date automatically by
obtaining time information from the PBX.
Moves or copies unretrieved messages from
one mailbox to another, after a specified
period of time. This service is only available to
subscribers (you cannot auto forward
messages to the System Group Distribution
Lists). Class of Service programming
determines the mailboxes that can use this
feature. Messages marked as "private"
cannot be forwarded. Also, a message is
never forwarded to the original sender of the
message.
REFERENCES
• See "Dialing Parameters" in
3.2.4 PBX Interface
Parameters.
• See "Alternate Extension
Assignment" in B5.1 Automated
Attendant Parameters.
• See "Alternate Extension
Group" in GLOSSARY.
• See "System Components" in
1.3.2 System Components.
• See 4.1 GUIDELINES FOR DPT
INTEGRATION.
• See "Creating Mailboxes" in
5.1.3 Starting the Quick Setup.
• See "The length of mailbox
numbers" in 5.1.3 Starting the
Quick Setup.
• See "Auto Configuration" in
GLOSSARY.
• See "Private Message" in this
Table.
• See "Authorization for Auto
Forwarding" in Table B-7 in B3
SYSTEM ADMINISTRATION—
SETTING COS (CLASS OF
SERVICE) PARAMETERS.
• See C3 SETTING COS (CLASS
OF SERVICE) PARAMETERS.
• See "Auto Forwarding" in
GLOSSARY.