Other Parameters-Dialing Parameter - Panasonic KX-TVP200 Installation Manual

Table B-28
Parameter
Numbering
Plan
1-16

Other Parameters-Dialing Parameter

To access the proper menu for Dialing Parameter, follow the menu path as shown:
System Administration Top Menu-1-5-7-2
B6 SYSTEM ADMINISTRATION—SYSTEM PARAMETER SETTINGS
Value Range
(Default)
2-5 digits Specifies the first 1 or 2 digits of the PBX extension
consisting numbers. You can add up to 16 entries to the list. Each
of 0-9, X entry can contain 2-5 digits "0-9", and a letter "X" which
(Numbering matches any digit. Extension numbers cannot begin with
Plan 2: "0".
2XX;
Numbering
Examples:
Plan 3:
a) If valid PBX extension numbers are to be specified 201
3XX;
through 264 and 301 through 364, specify the numbers
Numbering
as follows:
Plan 1, 4-16:
None)
b) If valid PBX extension numbers are to be specified 400
through 450 and 3300 through 3399, specify the
numbers as follows:
33XX: Indicates any 4-digit extension starting with
Note:
Auto Configuration will set this parameter automatically.
The Automated Attendant will dial any 2-5 digit PBX
extension number (except numbers beginning with "0")
whether valid or not. If the dialled number is included in the
numbering plan, the Automated Attendant will immediately
send it to the PBX without waiting for further input. If not, the
Automated Attendant will wait until the dialled number is
recognised as an extension number, the internal inter-digit
timer expires, or the caller dials 5 digits.
If the number for an outgoing call is not found on the
Numbering Plan, the VPS will consider it an outside
number. The VPS will then attempt to dial it using the
"Outgoing Call Setup Sequence".
Description/Function
2XX: Indicates any 3-digit extension number starting
with "2".
3XX: Indicates any 3-digit extension number starting
with "3".
4XX: Indicates any 3-digit extension number starting
with "4".
"33".
Installation Manual 255