Panasonic KX-TVP200 Installation Manual page 220

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
Table B-7
Parameter
Authorization
for Message
Notification
Beeper
Callback
No. Entry
Mode
MWL
Notification for
Unreceived
Message
Device
Notification for
Unreceived
Message
220 Installation Manual
Value Range
(Default)
1. Yes If set to "Yes", subscribers are able to utilise the
2. No Message Waiting Notification feature. The sub-
(No) parameters to be set include Beeper Callback No. Entry
Mode, MWL Notification for Unreceived Message, and
Device Notification for Unreceived Message. If set to
"No", sub-parameters cannot be assigned.
Note: This parameter in COS No.1 is set to "Yes" when
the Quick Setup procedure is used to create Subscriber
Mailboxes.
1. Caller Select Permits subscribers to use the Callback Number Entry
2. Without feature.
3. Before
4. After
Caller
5. Disable
Select:
(Disable)
Without:
Before:
After:
Disable:
Note: To utilise this feature, the callback number entry
code must be included in the subscriber's beeper
(pager) number. When "Disable" is selected or if the
caller does not enter a callback number, "System
Callback No." (see Table B-30) will be displayed on the
beeper's (pager's) display. If a caller's number is
received through a telephone company's Caller ID
service, the caller's number will be displayed instead of
"System Callback No.".
1. Yes If set to "Yes", the message waiting lamp will illuminate
2. No when unplayed messages remain after the subscriber
(Yes) has accessed the mailbox for Subscriber Service.
1. Yes If set to "Yes", the VPS calls the appropriate device in
2. No numerical order until all unplayed messages are
(No) received.
Description/Function
After recording a message, the caller is
asked if the message is urgent. If urgent,
the caller is asked to enter the callback
number.
Without recording a message, the caller is
asked to enter the callback number.
Before recording a message, the VPS asks
the caller to enter the callback number.
After recording a message, the VPS asks
the caller to enter the callback number.
Disables the Callback Number Entry
feature.