B2 System Administration-Mailboxes; Editing Mailboxes - Panasonic KX-TVP200 Installation Manual

B2 SYSTEM ADMINISTRATION—MAILBOXES
B2 SYSTEM ADMINISTRATION—MAILBOXES
Up to 1022 Subscriber Mailboxes can be created or edited by following the correct sequence
of steps.
To access the proper menu for mailbox setup, follow the menu path as shown:
System Administration Top Menu-1-1-1-Mailbox No.
Table B-3
Parameter
Mailbox
Number

Editing Mailboxes

The parameters of each mailbox can be edited based upon the needs of the subscriber.
To access the proper menu for mailbox editing, follow the menu path as shown:
System Administration Top Menu-1-1-1-Mailbox No.-1
Table B-4
Parameter
The Extension
of the Owner
210 Installation Manual
Value Range
(Default)
2-5 digits Specifies the subscriber's mailbox number. Mailbox
(None) number length is determined during setup or when
initialising the system. Mailbox numbers cannot begin with
"0". If the length of the mailbox number has been defined
as 3 digits, for example, the valid range for all mailbox
numbers would be 100 through 997 (998 and 999 would be
reserved for the Message Manager and the System
Manager). The length of the mailbox number cannot be
changed through the Mailbox Setting screen once it has
been specified.
Value Range
(Default)
2-5 digits Used to transfer calls through the VPS to a subscriber's
(None) mailbox.
Any valid extension number including an Extension Group
List number can be assigned.
Note: If an Extension Group List number is assigned to a
mailbox, all group members are able to share the
information stored there.
Description/Function
Description/Function