B3 System Administration-Setting Cos (Class Of Service) Parameters - Panasonic KX-TVP200 Installation Manual

B3 SYSTEM ADMINISTRATION—SETTING COS (CLASS OF SERVICE) PARAMETERS
B3 SYSTEM ADMINISTRATION—SETTING COS
(CLASS OF SERVICE) PARAMETERS
The COS-Class of Service parameters define the set of services that are available to mailbox
owners. A maximum of 64 (1-64) classes can be specified. A class of service number can be
assigned for each mailbox. More than 1 subscriber can share the same class of service.
• COS number 63 is only available to the Message Manager while COS number 64 is only
available to the System Manager.
• The procedure below determines the utilisation of the following special features on a
COS basis:
• Remote Call Forward to CO (available for COS numbers 1-63)
• Delete Message Confirmation (available for COS numbers 1-64)
• Message Waiting Notification (available for COS numbers 1-63)
• External Message Delivery (available for COS numbers 1-62)
• Auto Forwarding (available for COS numbers 1-62)
To access the proper menu for Class of Service Numbers 1-64, follow the menu path
as shown:
System Administration Top Menu-1-2-COS No.(1-64)
Note
In Table B-7 and Table B-8, sub-parameters are underlined. These sub-parameters
can be assigned only when the corresponding authorisation parameter is set to
"Yes".
Class of Service Setting
COS Nos. 1-62 (for subscribers)
To access the proper menu for Class of Service Numbers 1-62 for subscribers,
follow the menu path as shown:
System Administration Top Menu-1-2-COS No.(1-62)
216 Installation Manual