Kx-Ta Series Programming For Inband Integration Via The Manager's Extension - Panasonic KX-TVP200 Installation Manual

3.3 CONNECTING THE VPS WITH PANASONIC KX-T SERIES PBXs
* Check with manufacturer.
N/A Not Available
(A) Adding "A" for "answer" to the operator and extension transfer eliminates the message:
"You have a call" when the AA transfers a call. The VPS disconnects when the call is
answered. Adding "D" for "disconnect" creates a blind transfer.
Note
The UK version KX-T1232 does not support Inband Integration.
3.3.2 KX-TA Series Programming for Inband Integration via
the Manager's Extension
1.
Enable System Programme [102] for each extension connected to the VPS. Jack 07, or
jacks 07 and 08 can be assigned for the VPS as the Voice Mail port.
This parameter is used to tell the KX-TA series which extensions are connected to the VPS.
Ports with this parameter enabled can send Follow-on ID and touchtone call status
Signalling (busy, answered, disconnect, etc.) if the Voice Mail integration and Touchtone
Integration features are also enabled.
2.
Enable System Programme [103] to turn on Touchtone Integration. On extensions with the
Voice Mail port parameter enabled, the KX-TA series can send codes (touchtones) to
indicate call states; this increases VPS efficiency. Codes apply to all transferred calls;
outside calls only indicate disconnect (provided the KX-TA series is programmed for CPC
Detection, and the Telephone Company sends the CPC signal). Refer to the Table 3-3
3.2.4 PBX Interface Parameters in Section 3.2.4 PBX Interface Parameters.
3.
Put all extensions connected to the VPS into 1 extension group using System Programme
[600].
Reserve this extension group for these extensions! Do not mix other extensions into
this group.
4.
Enable hunting for the VPS extension groups using System Programme [100].
5.
Set the hunting type for the VPS extension groups to circular using System Programme
[101].
6.
At every VPS extension, temporarily connect an SLT or butt set, go off-hook and dial 7301#
to turn on Data Line Security. This prevents the KX-TA series from sending Executive
Override or Call Waiting tones to these extensions. We recommend that all Voice Mail port
extensions have this feature enabled to avoid interruption of recording.
7.
Select the appropriate outside (CO) line feature settings depending on how your customer
plans to use the VPS: A) to answer all incoming calls, B) as an operator backup, or C) to
only answer calls not answered by user extensions.
Recommended outside (CO) line feature settings:
58 Installation Manual