Panasonic KX-TVP200 Installation Manual page 308

D6 RECORDING MESSAGES
3.
Press [6] to modify user prompts.
4.
Press [1] to change User Prompt 1, or [2] to change User Prompt 2.
5.
To change specific prompts, Go to Step 6.
To change all prompts in a row without reviewing the current recording, Go to Step 7.
6.
To change specific prompts:
a)
Press [1]
b)
Enter the prompt number you want to change. (There is a complete list of modifiable
prompts in D9 LIST OF MODIFIABLE PROMPTS.)
c)
The VPS plays the prompt number.
d)
Press [1] to change the prompt. If a prompt has not yet been recorded, the VPS plays
the system prompt—go to Step 6g. (If you wish to turn off a certain prompt, please first
record a "dummy" prompt. Then go back to Step 6 and you will be able to turn it off by
going through these steps.)
e)
The VPS plays the current prompt. Press [1] to change the prompt.
f)
Press [1] to record a new prompt.
g)
Record a prompt at the tone and Press [1] to end recording.
h)
Press [2] to accept the recorded prompt.
i)
Repeat Steps 6b to 6h to record other prompts.
7.
To change all prompts in a row:
a)
Press [2]
b)
Enter the prompt number you want to change. (There is a complete list of modifiable
prompts in D9 LIST OF MODIFIABLE PROMPTS.)
c)
The VPS plays the prompt number.
d)
Press [1] to change the prompt.
e)
Record a prompt at the tone and Press [1] to end recording.
308 Installation Manual
Note
• Press [2] to return to Step 6b.
Note
• Press [2] to retain the current recording—Return to Step 6b.
Note
• Press [2] to erase the current recording—Return to Step 6b.
• Press [3] to turn off/on the specified prompt—Return to Step 6b.
Note
• Press [1] to review the recorded prompt.
• Press [3] to erase the recorded prompt and try again—Return to Step 6f.
• Press [ ] to erase the recorded prompt and exit—Return to Step 6b.
Note
• Press [2] to go to Step 7g.
• Press [3] to turn off/on the prompt.