Log File; Date/Time - Datasat RS20i Installation And Operating Manual

4.9.2

Log File

The log file is a listing of the most recent software events that have taken place since the RS20i was last
powered on. The listing includes changes made internally by the RS20i software, as well as user initiated
system changes through the touch screen interface. You may scroll through the log file using the front
panel Volume Control knob.
Setup > System > More > View Log File
The log file is helpful for debugging by Datasat Digital Entertainment staff. In some cases, Customer
Service may ask an installer to save the log files on the USB Flash drive and send for troubleshooting
purposes. If so, you can select Save Diagnostic Info. See 4.8.2 USB Save/Restore on page 89.
4.9.3

Date/Time

Access the Date/Time setup screen from System Setup (2). The time configured on this screen is UTC –
Universal Time Code, also known as GMT. You may configure with local time, provided NTP Server is not
in use because that would conflict.
Setup > System > More > Date/Time
RS20i Installation & Operating Guide
RS20i Installation and Operating Guide
Figure 64. Log File Screen
Figure 65. Date/Time Screen
Page 97
Document # 9301H52900 Ver. 1.02