Datasat RS20i Installation And Operating Manual page 150

25. Dolby LFE Boost
Enable 10dB gain to the subwoofer outputs when playing Dolby Digital decoded audio
Command:
Response:
Parameters:
ddlfe
0
1
Audio Decoder Stream Information
26. Decoder Stream
Returns a text description of the stream type currently playing
Command:
Response:
Parameters:
[Desc]
Description of the current audio stream type being received by the decoder.
Example
Send:
Receive:
27. Decoder Channels
Returns a text description of the number of channels at the decoder output. This does
not include additional channels from processing by Auro Decoder or Upmix, DTS NEO:X
or Dolby PLIIx/PLIIy.
Command:
Response:
The string [n/m/.s] appears only when the decoder is running. In that case the values n,
m, and s are defined as follows.
[n]
Number of front channels at the decoder output.
[s]
The value is 1 when there is a decoder subwoofer output. Otherwise it is 0.
Example
Send:
Receive:
Appendix E. Remote Command API
RS20i Installation and Operating Guide
@ DECODERDDLFEBOOST [ddlfe]<cr>
DECODERDDLFEBOOST ddlfe<CR>
Selection
Do not apply 10dB gain for Dolby
Digital
Apply 10dB gain for Dolby Digital
@DECSTREAM<cr>
[Desc]<CR>
@DECSTREAM<cr>
DTS 48k + NeoX <cr>
@DECCHANS<cr>
[n.s]<CR>
@DECCHANS <cr>
7.1 <cr>
Read/Write
Read/Write
Read/Write
Document #: 9301H52900 Ver. 1.02
Page E-15