Edit Eq - Datasat RS20i Installation And Operating Manual

4.4.1

Edit EQ

The Edit EQs button on the Audio EQ Setup screen opens the Edit EQ screen to Copy, Create, Rename
or Delete an Audio EQ Setup.
Setup > EQs > Edit EQ
Functions on this screen are described in the table below.
Table 14. Edit EQ
Function
Copy EQ
Create EQ
Rename EQ
Delete EQ
RS20i Installation & Operating Guide
RS20i Installation and Operating Guide
Figure 33. Edit EQ Screen
Description
Use an existing EQ setup as a template for a new one. Select the EQ you wish
to copy from by selecting it from the drop down box. Then, touch the To box to
bring up the virtual keyboard and enter a name for the new EQ. Press the
Copy button to complete the process, or press Cancel to quit.
Select an empty or clear EQ setup and use it as a template for a new one.
Press the Create button to complete the process, or press Cancel to quit.
Give an existing EQ setup a new name. Select an existing EQ setup from the
drop-down list on the right side of the screen. Touch the To box to bring up the
virtual keyboard and enter a new name for the EQ setup. Press the Rename
button to complete the process, or press Cancel to quit.
Note: The EQ name is changed for all inputs that use the EQ.
Select an existing EQ setup from the drop-down list on the right side of the
screen. Press the Delete button to complete the process, or press Cancel to
quit.
Page 54
Document # 9301H52900 Ver. 1.02