Edit Output Preset - Datasat RS20i Installation And Operating Manual

4.5.1

Edit Output Preset

The Edit Output Preset screen permits copying, renaming, and deleting Output Presets. To access this
screen:
Setup > Out Prst > Edit Output Presets
The functions available on this screen are described in this table.
Table 21. Edit Output Presets
Function
Copy Output
Preset
Create Output
Preset
Rename Output
Preset
RS20i Installation & Operating Guide
RS20i Installation and Operating Guide
Figure 44. Output Preset Edit
Description
Copy an existing Output Preset to create a new one. See Table 22 Speaker
Configurations, page 77.
Select the Output Preset you wish to copy from by selecting it from the Copy
drop down list.
Then, touch the To box to bring up the virtual keyboard and enter a name for
the new Output Preset.
Press the Copy button to complete the process, or press Cancel to quit.
Select an Output Preset template to use to create a new Output Preset.
Select the Output Preset you wish to copy from by selecting it in the Create
using template drop down box.
Then, touch the To box to bring up the virtual keyboard and enter a name for
the new Output Preset.
Press the Create button to complete the process, or press Cancel to quit.
Give an existing Output Preset a new name.
Select an existing Output Preset from the Rename drop-down list on the
right side of the screen.
Touch the To box to bring up the virtual keyboard and enter a new name for
the Output Preset.
Page 66
Document # 9301H52900 Ver. 1.02