Datasat RS20i Installation And Operating Manual page 148

18. Height Gain for Pro Logic IIz
This command sets or reads the height gain selection used with Pro Logic IIz.
Command:
Response:
Parameters:
[value]
0
1
2
19. Auro-3D Strength
This command sets upmixing strength for Auro-3D
Command: @AUROSTRENGTH [value]<cr>
Response: AUROSTRENGTH value<CR>
Parameters:
[value]
1-16
20. Auro-3D Preset
This command sets or reads the Auro-3D Preset. Selections are Small, Medium, Large,
or Speech
Command: @AUROPRESET [value]<cr>
Response: AUROPRESET value<CR>
Parameters:
[value]
0
1
2
3
21. Auro-3D Listening Mode
This command sets or reads the Auro-3D Listening Mode. Selections are Stereo,
Surround, and Auro-3D
Command: @AUROLM [value]<cr>
Response: AUROLM value<CR>
Appendix E. Remote Command API
RS20i Installation and Operating Guide
@DPL2HEGAIN [value]<cr>
DPL2HEGAIN value<CR>
Selection
Low
Mid
High
Selection
16 is the highest strength level
Selection
Small
Medium
Large
Speech
Read/Write
Read/Write
Read/Write
Read/Write
Document #: 9301H52900 Ver. 1.02
Page E-13