Datasat RS20i Installation And Operating Manual page 135

RS20i Installation and Operating Guide Page D-
5
Auro 11.1
For large rooms, such as those with an acoustically transparent screen, Auro 11.1 completes the height layer
by adding a height speaker corresponding to the Center channel.
Auro 13.1
The full configuration for Auro-3D is 13.1, which adds to the 11.1 configuration the Left Back and Right Back
speakers used in 7.1 configurations. For a very large room, you may add Left Back Height and Right Back
Height speakers, which are ganged with the Left Surround Height and Right Surround Height speakers to
create an enveloping sound field for the height layer. Although the Auro format uses a mono overhead
channel, you may also for large rooms wish to use more than one overhead speaker to provide even
coverage of the listening position from the top layer.
Appendix D: Speaker Configurations D-5 Document #: 9301H52900 Ver. 1.02