Network/Ports Menu - Dell S5830DN User Manual

Understanding printer menus
Use
Print Directory
Print Demo
Demo Page
[list of available demo pages]
Asset Report
Event Log Summary

Network/Ports menu

Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu.
Use
Energy Efficient Ethernet
Enable
Disable
PCL SmartSwitch
On
Off
To
Print a list of all the resources stored in an optional flash memory card or
printer hard disk.
Notes:
•
Job Buffer Size must be set to 100%.
•
Make sure that the memory card or hard disk is installed and working
properly.
Print demo files that are available in the firmware, flash, and disk options.
Print a report containing printer asset information such as serial number and
model name.
Print a summary of logged events.
To
Allow the printer to connect to a network.
Notes:
•
Auto is the factory default setting.
•
This menu item appears only if an optional network adapter is installed.
To
Reduce power consumption when the printer receives no data from the
Ethernet network.
Note: Enable is the factory default setting.
Set the printer to automatically switch to PCL emulation when a print job
requires it, regardless of the default printer language.
Notes:
•
On is the factory default setting.
•
If PCL SmartSwitch is disabled, then the printer does not examine
incoming data and it uses the default printer language specified in the
Setup menu.
95