Understanding printer menus
Home screen customization
Hole Punch Alarm
Change the icons and buttons that appear on the printer
For each icon or button, select from the following options:
Do not display
Note: "Do not display" is the factory default setting.
Set the amount of light from the bin.
If Eco-Mode is set to Energy or Energy/Paper, then the
factory default setting is Dim.
If Eco-Mode is set to Off or set to Paper, then the factory
default setting is Bright.
This menu appears only when an indicator light is
installed on the bin or when an optional bin with an
indicator light is added.
Set an alarm to sound when the printer requires user
For each alarm type, select from the following options:
Off is the factory default setting for Alarm Control, Staple
Alarm, and Hole Punch Alarm. Off means no alarm will
Single is the factory default setting for Cartridge Alarm,
Staple Alarm, and Hole Punch Alarm. Single sounds
three quick beeps.
Continuous repeats three beeps every 10 seconds.
Set the amount of time the printer waits after a job is printed
before it goes into a reduced power state.
30 is the factory default setting.
Disabled appears only when Energy Conserve is set to
Lower settings conserve more energy, but may require
longer warm‑up times.
Select a high setting if the printer is in constant use.
Under most circumstances, this keeps the printer ready
to print with minimum warm‑up time.