Download  Print this page

Advertisement

Table of Contents
Learning about the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to
install any options, then leave enough room for them also. It is important to:
Set up the printer near a properly grounded and easily accessible electrical outlet.
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
Provide a flat, sturdy, and stable surface.
Keep the printer:
Clean, dry, and free of dust.
Away from stray staples and paper clips.
Away from the direct airflow of air conditioners, heaters, or ventilators.
Free from direct sunlight and humidity extremes.
Observe the recommended temperatures and avoid fluctuations:
Ambient temperature 15.6 to 32.2°C (60 to 90°F)
Storage temperature -40 to 43.3°C (-40 to 110°F)
Allow the following recommended amount of space around the printer for proper ventilation:
1
Right side 152 mm (6 in.)
2
Front
3
Left side
4
Rear
5
Top
508 mm (20 in.)
152 mm (6 in.)
152 mm (6 in.)
115 mm (4.5 in.)
10

Advertisement

Table of Contents

   Related Manuals for Dell S5830DN

Comments to this Manuals

Symbols: 0
Latest comments: