Paper and specialty media guide
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper
sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper
size is not available, then select Universal or turn off tray size sensing. For more information, contact technical
Paper is supported in long‑edge orientation.
Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length
is from 148 mm (5.83 in.) to 356 mm (14 in.).
Paper sizes, types, and weights supported by the output options
Supported paper sizes
The ﬁnisher staples the paper if it is loaded long edge ﬁrst.
The ﬁnisher stacks the paper but does not staple or punch holes in it.
The ﬁnisher stacks and staples the paper but does not punch holes in it.
The ﬁnisher staples the paper if its width is from 210 mm (8.27 in.) to 217 mm (8.54 in.).
98 x 162 mm
(3.9 x 6.4 in.) to
176 x 250 mm
(6.9 x 9.8 in.)
Staple, hole punch