Download  Print this page

Advertisement

Table of Contents
Understanding printer menus
Use
Protocol
Standard
Fastbytes
Honor Init
On
Off
Parallel Mode 2
On
Off
Mac Binary PS
On
Off
Auto
ENA Address
yyy.yyy.yyy.yyy
ENA Netmask
yyy.yyy.yyy.yyy
ENA Gateway
yyy.yyy.yyy.yyy
Serial [x] menu
Note: This menu appears only when an optional serial card is installed.
To
Specify the parallel port protocol.
Notes:
Fastbytes is the factory default setting. It provides compatibility with most
existing parallel ports and is the recommended setting.
Standard tries to resolve parallel port communication problems.
Determine if the printer honors printer hardware initialization requests from the
computer.
Notes:
Off is the factory default setting.
The computer requests initialization by activating the Init signal from the
parallel port. Many personal computers activate the Init signal each time
the computer is turned on.
Determine if the parallel port data is sampled on the leading or trailing edge of
a strobe.
Note: On is the factory default setting.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
Auto is the factory default setting.
Off filters print jobs using the standard protocol.
On processes raw binary PostScript print jobs.
Set the network address information for an external print server.
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
Set the netmask information for an external print server.
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
Set the gateway information for an external print server.
Note: This menu item is available only if the printer is attached to an external
print server through the USB port.
104

Advertisement

Table of Contents

   Related Manuals for Dell S5830DN

Comments to this Manuals

Symbols: 0
Latest comments: