Download  Print this page

Network/ports Menu - Dell B2360d-dn User Manual

Laser printer.
Hide thumbs

Advertisement

Understanding the printer menus
Use
Print Fonts
PCL Fonts
PostScript Fonts
Print Directory
Asset Report

Network/Ports menu

The menus in this section only appear in network printers or printers connected to print servers.
Active NIC menu
Use
Active NIC
Auto
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu. All inactive ports are omitted.
Use
PCL SmartSwitch
On
Off
PS SmartSwitch
On
Off
To
Print a report of all the fonts available for the printer language currently set in
the printer.
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card.
Notes:
Job Buffer Size must be set to 100%.
Make sure the optional flash memory is installed correctly and working
properly.
This menu item appears only when an optional flash memory card is
installed.
Print a report containing printer asset information, such as serial number and
model name.
To
Notes:
Auto is the factory default setting.
This menu item appears only when an optional network card is installed.
To
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
Notes:
On is the factory default setting.
If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
Set the printer to automatically switch to PS emulation when a print job requires it,
regardless of the default printer language.
Notes:
On is the factory default setting.
If PS SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.
59

Advertisement

Table of Contents

   Also See for Dell B2360d-dn

   Related Manuals for Dell B2360d-dn

This manual is also suitable for:

B2360dB2360dn

Comments to this Manuals

Symbols: 0
Latest comments: