Print Is Too Light - Dell S5830DN User Manual

Troubleshooting
Action
Step 5
a
Load paper from a fresh package.
Note: Paper absorbs moisture due to high humidity. Store
paper in its original wrapper until you use it.
b
Resend the print job.
Is the print still too dark?
Step 6
Replace the imaging unit, and then resend the print job.
Is the print still too dark?

Print is too light

Action
Step 1
a
From the Quality menu on the printer control panel, increase
the toner darkness.
Note: 8 is the factory default setting.
b
Resend the print job.
Is the print still too light?
Step 2
From the printer control panel, set the paper type, texture, and
weight in the Paper menu to match the paper loaded in the tray.
Is the tray set to the type, texture, and weight of the paper loaded?
Step 3
a
Depending on your operating system, specify the paper type,
texture, and weight from Printing Preferences or from the Print
dialog.
b
Resend the print job.
Is the print still too light?
Yes No
Go to step 6. The problem is
solved.
Contact technical The problem is
support. solved.
Yes No
Go to step 2. The problem is
solved.
Go to step 3. Change the paper
type, texture, and
weight to match the
paper loaded in the
tray.
Go to step 4. The problem is
solved.
210