Understanding printer menus
Print All Order
Set the storage location for downloads.
RAM is the factory default setting. Storing downloads in
the RAM is temporary.
Storing downloads in a ﬂash memory or in a printer hard
disk places them in permanent storage. Downloads
remain in the ﬂash memory or printer hard disk even
when the printer is turned off.
This menu item appears only if an optional ﬂash memory
or a formatted, working printer hard disk is installed.
Specify how the printer handles temporary downloads, such
as fonts and macros stored in the RAM, when the printer
receives a print job that requires more than the available
Off is the factory default setting. This sets the printer to
retain downloads only until memory is needed.
Downloads are deleted in order to process print jobs.
On sets the printer to retain downloads during language
changes and printer resets. If the printer runs out of
memory, then Memory Full  appears on the
printer display, but downloads are not deleted.
Specify the order in which held and conﬁdential jobs are
printed when Print All is selected.
Note: Alphabetical is the factory default setting.
Specify whether to print on one side or both sides of the page.
1 sided is the factory default setting.
You can set two‑sided printing from the printer software.
For Windows users:
Click File > Print, and then click Properties, Preferences, Options, or
For Macintosh users:
Choose File > Print, and then adjust the settings from the Print dialog and