Dell S5830DN User Manual page 192

Troubleshooting
Tray problems
Action
Step 1
a
Pull out the tray, and then do one or more of the following:
•
Check for paper jams or misfeeds.
•
Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.
•
If you are printing on custom‑size paper, then make sure
that the paper guides rest against the edges of the paper.
•
Make sure the paper is below the maximum paper fill
indicator.
•
Make sure paper lies flat in the tray.
b
Check if the tray closes properly.
Is the tray working?
Step 2
a
Turn off the printer, then wait about 10 seconds, and then turn
the printer back on.
b
Resend the print job.
Is the tray working?
Step 3
Check if the tray is installed and recognized by the printer.
Print a menu settings page, and then check if the tray is listed
in the Installed Features list.
Is the tray listed in the menu settings page?
Step 4
Check if the tray is available in the printer driver.
Note: If necessary, manually add the tray in the printer driver to
make it available for print jobs. For more information, see
"Adding available options in the print driver" on page
Is the tray available in the printer driver?
Yes
The problem is
solved.
The problem is
solved.
Go to step 4.
The problem is
solved.
41.
192
No
Go to step 2.
Go to step 3.
Reinstall the tray. For
more information,
see the setup
documentation that
came with the tray.
Contact technical
support.