Understanding printer menus
Run Initial setup
Home screen customization
Search Held Jobs
Jobs by user
Minimize the use of energy, paper, or specialty media.
Off is the factory default setting. Off resets the printer to
its factory default settings.
Energy minimizes the power used by the printer.
Performance may be affected, but print quality is not.
Energy/Paper minimizes the use of power and of paper
and specialty media.
Paper minimizes the amount of paper and specialty
media needed for a print job. Performance may be
affected, but print quality is not.
Reduce the amount of noise produced by the printer.
Off is the factory default setting. This setting supports
the performance speciﬁcations for your printer.
On conﬁgures the printer to produce as little noise as
possible. This setting is best suited for printing text and
Selecting Photo from the printer driver may disable Quiet
mode and provide better print quality and full‑speed
Instruct the printer to run the setup wizard.
Yes is the factory default setting.
After completing the setup wizard by selecting Done at
the Country select screen, the default becomes No.
Specify the unit of measurement for paper sizes.
US is the factory default setting.
The initial setting is determined by your country or
region selection in the initial setup wizard.
Change the icons and buttons that appear on the printer
For each icon or button, select from the following options:
Do not display
Note: "Do not display" is the factory default setting.