Press and hold Continue
Press and hold Cancel
Turn off the printer to exit the menus.
Use the Network menu to change printer settings on jobs sent through a network port (either Standard
Network or Network Opt <x>).
Use this setting to: send print jobs to the printer and query printer status information simultaneously.
Auto (factory default)
MAC Binary PS
Use this setting to: configure the printer to process Macintosh binary PostScript print jobs.
Off-The printer filters PostScript print jobs using standard protocol.
On-The printer processes raw binary PostScript print jobs from computers using the Macintosh
operating system. This setting often causes Windows print jobs to fail.
Auto (factory default)-The printer processes print jobs from computers using either Windows
or Macintosh operating systems.
Set Card Speed
Use this setting to: automatically detect the connection speed of your network. You can disable this setting
to set the speed manually.
Auto (factory default)-The printer detects current network speed.
until all of the lights cycle to save a setting.
until all of the lights cycle to return to the Home menu.