Dell S5830DN User Manual page 40

Additional printer setup
Connect the printer to the computer using a USB cable or Ethernet cable.
Make sure to match the following:
•
The USB symbol on the cable with the USB symbol on the printer
•
The appropriate Ethernet cable to the Ethernet port
•
The appropriate parallel cable with the parallel port
Use the
1 Parallel port
2 USB port
3 Ethernet port
4 USB printer port
5 Security slot
6 Printer power cord socket Connect the printer to a properly grounded electrical outlet.
Warning—Potential Damage: Do not touch the USB cable, any wireless network adapter, or the printer in the
area shown while actively printing. Loss of data or a malfunction can occur.
Note: This feature is available only if you purchase optional trays and a caster base.
After attaching the Ethernet cable and power cord, neatly tuck the cables in the channels at the back of the printer.
To
Connect the printer to a computer.
Note: This can also be used in installing an optional Internal Solutions Port
(ISP).
Attach an optional wireless network adapter.
Connect the printer to a network.
Connect the printer to a computer.
Attach a lock that will secure the controller board.
40