Loading paper and specialty media
Flex sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the paper.
Straighten the edges on a level surface.
Load the paper stack with the printable side facedown.
Note: Make sure the paper is loaded properly.
There are different ways of loading letterhead depending on whether an optional staple ﬁnisher is
installed or not.
If you are loading prepunched paper for use with the staple ﬁnisher, then make sure the holes on the
long edge of the paper are on the right side of the tray.
Note: If the holes on the long edge of the paper are on the left side of the tray, then a jam may occur.
Without an optional staple ﬁnisher With an optional staple ﬁnisher