Paper and specialty media guide
Supported paper sizes, types, and weights
Paper types and weights supported by the printer
The printer engine supports 60–176‑g/m
* Print on transparencies by batches of only up to 20 to prevent them from sticking together. For more information,
"Tips on using transparencies" on page
Paper sizes supported by the printer
Note: When printing on paper less than 210 mm (8.3 inches) wide, the printer may print at a reduced speed
after a period of time to ensure the best print performance.
If your preferred default paper size cannot be set in the printer control panel, then you may select common paper
sizes that correspond to the position of the length guide in the tray from the Paper Size/Type menu. If the paper
size is not available, then select Universal or turn off tray size sensing. For more information, contact technical
Paper is supported in long‑edge orientation.
Universal is supported in duplex mode only if the width is from 105 mm (4.13 in.) to 216 mm (8.5 in.), and the length
is from 148 mm (5.83 in.) to 356 mm (14 in.).
(16–47‑lb) paper weights.
250‑ or 550‑sheet
210 x 297 mm
(8.3 x 11.7 in.)
148 x 210 mm
(5.8 x 8.3 in.)
105 x 148 mm
(4.1 x 5.8 in.)
182 x 257 mm
(7.2 x 10.1 in.)