Printing Slows Down; Tray Linking Does Not Work - Dell S5830DN User Manual

Troubleshooting

Printing slows down

Notes:
•
When printing using narrow paper, the printer prints at a reduced speed to prevent damage to the
fuser.
•
The printer speed may be reduced when printing for long periods of time, or printing at elevated
temperatures.
Action
a
Make sure the size of the paper loaded in the tray matches the
fuser type.
Note: To identify the fuser type, view the label on the fuser.
b
Resend the print job.
Does the print speed increase?

Tray linking does not work

Notes:
•
The trays can detect paper length.
•
The multipurpose feeder does not automatically detect the paper size. You must set the size from the
Paper Size/Type menu.
Action
Step 1
a
Open the trays, and then check if they contain paper of the
same size and type.
•
Check if the paper guides are in the correct positions for
the size of the paper loaded in each tray.
•
Check if the paper size indicators on the paper guides are
aligned with the paper size indicators on the tray.
b
Resend the print job.
Do the trays link correctly?
Step 2
a
From the printer control panel, set the paper size and type in
the Paper menu to match the paper loaded in the trays to be
linked.
Note: The paper size and type must match for trays to be
linked.
b
Resend the print job.
Do the trays link correctly?
Yes No
The problem is Contact
solved. support
printer dealer.
Yes No
The problem is Go to step 2.
solved.
The problem is Contact
solved. support.
201
technical
or your Dell
technical