Understanding the printer menus
Network Setup Page
The menus in this section only appear in network printers or printers connected to print servers.
Active NIC menu
[list of available network cards]
Standard Network or Network [x] menu
Note: Only active ports appear in this menu. All inactive ports are omitted.
Print a report containing information about the network printer settings, such as
the TCP/IP address information.
Note: This menu item appears only in network printers or in printers connected
to print servers.
Print a list of profiles stored in the printer.
Note: This menu item appears only when LDSS is enabled.
Print a report of all the fonts available for the printer language currently set in
Note: A separate list is available for PCL and PostScript emulations.
Print a list of all the resources stored in an optional flash memory card.
Job Buffer Size must be set to 100%.
Make sure the optional flash memory is installed correctly and working
This menu item appears only when an optional flash memory card is
Print a report containing printer asset information, such as serial number and
Auto is the factory default setting.
This menu item appears only when an optional network card is installed.
Set the printer to automatically switch to PCL emulation when a print job requires
it, regardless of the default printer language.
On is the factory default setting.
If PCL SmartSwitch is disabled, then the printer does not examine incoming
data and it uses the default printer language specified in the Setup menu.