Canon MF419x User Manual page 548

[Allow]
[Only Allow Sending to Myself or
Specified Folder]
When [Allow] is specified in [File Sending]
[Authentication Method]
Allows you to specify whether an authentication screen is shown on the server when sending.
[Display the authentication screen using the same
authentication information as when the sending operation
started]
[Display the authentication screen without any
authentication information]
[Use the authentication information from the address book
and do not display the authentication screen]
When [Only Allow Sending to Myself or Specified Folder] is specified in [File Sending]
[Authentication Method]
Allows you to specify whether an authentication screen is shown on the server when sending.
[Use the same authentication information as
when the sending operation started]
[Display the authentication screen without any
authentication information]
[Specify Destination Folder]
Selecting this check box allows you to specify the folder where the data is saved. If the check box is not selected,
the save destination is set based on authorized user information registered on the LDAP server.
[Host Name]
[Folder Path]
8
Configure the settings for sending faxes.
Security
Saving to shared folders and FTP servers is not blocked.
Blocks all saving to shared folders and FTP servers other than specified
folders. The data is saved to folders registered on the LDAP server or to
the folder specified in [Specify Destination Folder].
Carries out authorization on the server using the user name and
password entered in the Authorized Send logon screen. Selecting the
[Display Authentication Screen] check box displays the authentication
screen with this user name and password already entered when you
send the data.
Displays the authentication screen with the user name and password
fields blank.
Enter a host name for the shared folder or FTP server up to 120 characters in length.
Enter a path name for the save destination folder up to 120 characters in length (excluding
the host name). When the [Add User Name] check box is selected, the user name and path
used for LDAP authentication are added.
539
Displays the authentication screen showing the same user
name and password entered in the Authorized Send logon
screen.
Displays the authentication screen with the user name and
password fields blank.
No authentication screen is displayed when sending.
Authentication is carried out on the server using the user
name and password set in the Address Book.