Switching 1-Sided and 2-Sided Printing
Make sure that the paper size switch lever is set properly
●
When performing 2-sided printing, improper setting of the paper size switch lever can cause misfeeds or
paper jams. When performing 2-sided printing, make sure that the paper size switch lever is set properly for
the size of the paper to be used.
Make sure that the sub-output tray is closed
●
When the sub-output tray is open, you cannot perform 2-sided printing. When performing 2-sided printing,
always make sure that the sub-output tray is closed.
●
2-sided printing may not be available with some sizes and types of paper.
[Basic Settings] tab
Printing]
Using the Machine as a Printer
You can make both 1-sided and 2-sided printouts. The default setting is [2-sided
Printing]. Change the setting as necessary.
Interior(P. 22)
Select [1-sided Printing] or [2-sided Printing] in [1-sided/2-sided/Booklet
Select the position to bind in [Binding Location]
Back Side(P. 20)
[OK]
250
Paper(P. 858)
0UWX-049