Canon MF419x User Manual page 692

Gutter
Shift the print position to adjust the binding margin to apply to the binding edge specified by <Binding
Location>. The value "00.0" exerts no effect on the binding margin.
-50.0 to 00.0 to +50.0 (mm)
<Menu> <Printer Settings>
margin <Apply>
Entering the setting value
Specify the print position shift direction and shift width. Whether the setting value is a "+" or "-" value
determines the binding edge along which to adjust the binding margin. You can adjust the binding margin in
units of 0.5 mm. Use
decrease the value.
Setting Value
A value with a "+" sign
A value with a "-" sign
Offset Short Edge/Offset Long Edge
Irrespective of the paper source, you can shift the print position in units of 0.5 mm for all print jobs.
-50.0 to 00.0 to +50.0 (mm)
Setting Menu List
<Layout>
/ to move the cursor, and
Long Edge
Left edge of paper Top edge of paper
Right edge of paper Bottom edge of paper
683
<Gutter> Specify the binding
/ to switch between "+" / "-" and to increase or
Short Edge