Connecting by a Touch on the Machine (NFC)
This machine supports the NFC (Near Field Communication) standards. By simply touching an NFC compatible mobile
device to the NFC mark (
device to the machine. For the NFC compatibility of your mobile device, see the instruction manual for the device or
contact your manufacturer.
Setting the Mobile Device
●
Set the device so that its NFC function is enabled. For more information, see the instruction manuals for your
mobile devices or contact your manufacturer.
●
Install Canon Mobile Application on your mobile device. For more information, see the Canon website at:
http://www.canon.com/ .
●
Launch Canon Mobile Application.
Required Machine Setting
To print from NFC compatible devices, specify the following settings.
●
Set <Enable NFC> to <On>.
●
Set the IP address in IPv4 format.
●
You can download the application software for free, but you will be charged the Internet connection fee.
●
If connection cannot be established, change the position where you touch the mobile device to the machine.
●
It may take some time before the connection is complete.
●
Proper operation may not be possible depending on the mobile device.
Can Be Used Conveniently with a Mobile Device
Operation Panel(P. 26) ) on the operation panel of the machine, you can connect the
Enable NFC(P. 708)
Setting IPv4 Address(P. 437)
390
0UWX-0H8